Moving from Ableton Live to FL Studio does not mean starting over. Your unfinished sets can come with you as FL Studio projects you can keep working on. This guide covers how to bring them over, what carries over and what to check in FL Studio afterwards.

Convert now

2 free conversions every month. No card required.

FL Studio cannot open an Ableton .als file directly (see can FL Studio open Ableton projects). The set has to be converted into an FL Studio project (.flp file) first. DAWPORT does that conversion online.

Before you convert

  1. Collect All and Save in Live. This copies the samples your set uses into its Project folder (Ableton manual). Then upload the Project folder as a .zip, .rar or .7z archive. Uploading only the .als file also works, but then the converted project keeps your original sample paths. Upload limits: .flp and .als files up to 16 MB, or .zip, .rar and .7z archives up to 512 MB. See samples and missing media.
  2. Move your song into the Arrangement. DAWPORT converts the Arrangement, not Session View. If you sketched in Session View, record or copy the clips you want into the Arrangement first.
  3. Install your third-party plug-ins for FL Studio, in the same format (VST2 or VST3) the set uses.
  4. Consider rendering Live-only sounds. Operator, Wavetable and other Live synths are not converted. Their notes arrive on an empty FL Studio channel, so render parts whose sound you need to audio in Live first.
  5. Keep your original set.

What carries over

In Ableton Live In FL Studio
Arrangement MIDI clips One pattern per clip, named after the clip or track, placed in the Playlist
Arrangement audio clips Playlist audio clips, with warping turned into time stretching and looped clips laid out per loop
Clip gain and fades Clip volume and fades
Tracks, group tracks and return tracks Playlist tracks and Mixer tracks; returns become ordinary Mixer tracks that other tracks send to
Post-fader sends Mixer sends, with the send level carried over
Tempo and tempo automation Tempo and tempo automation, within FL Studio's 10 to 522 BPM range
Third-party VST2/VST3 plug-ins The same plug-ins in FL Studio's wrapper, with their saved settings, where supported
Stock effects with a mapping FL Studio plug-ins, such as Fruity Parametric EQ 2, Fruity Compressor, Fruity Delay 3, Fruity Reeverb 2, Fruity Balance and Fruity WaveShaper
Simpler, including Simplers inside racks Sampler channels
Supported arrangement automation Automation clips
Samples from your archive A Samples folder next to the .flp file in the download

Converted devices use FL Studio's own names, so a Live Utility becomes Fruity Balance. Most stock device mappings are approximations, and the conversion notes label them. Details: plug-ins after converting, how automation transfers and stock effect equivalents.

What works differently in FL Studio

Channels, patterns and the Playlist

In Live, a track holds its clips and its device chain. In FL Studio, instruments live in the Channel Rack, notes live in patterns, and the Playlist arranges pattern clips, audio clips and automation clips. Playlist tracks are not bound to an instrument or a mixer track; any clip can go on any Playlist track (Image-Line manual).

DAWPORT keeps your layout familiar: each Live track's clips are placed on a matching Playlist track, and each MIDI clip becomes its own pattern. Once you are comfortable in FL Studio, you can merge or reuse patterns the FL Studio way.

The mixer is separate

FL Studio routes channels to Mixer tracks, and each Mixer track has its own effect slots and can send to other Mixer tracks (Image-Line manual). Your converted Live tracks and returns appear as Mixer tracks, with their effects in the slots.

The Arrangement is what converts

Live's Session View is a grid for launching clips, while the Arrangement is a timeline (Ableton manual). FL Studio has no Session View, and its Playlist is also a timeline, so DAWPORT converts the Arrangement. Session View clips are not converted. Record or copy the clips you need into the Arrangement before converting, and save the set.

What to check after converting

Open the .flp file in FL Studio 26, then go through this list:

  1. Read the conversion notes. They list devices that were approximated or not ported and automation that could not be converted. The plug-in list shows Ported, Limited or Not ported for each device.
  2. Missing plug-ins. If FL Studio cannot load a plug-in, install it in the same format and scan it in the Plugin Manager.
  3. Rebuild Live-only instruments. When a Live synth is not converted, its notes arrive on an empty FL Studio channel. The conversion notes list it. Load an FL synth or plug-in on that channel, or render the part to audio in Live before converting.
  4. Pre-fader sends. FL Studio Mixer sends are post-fader, so pre-fader sends are not converted. The notes list them; rebuild them if you need them.
  5. Time signature changes. The time signature at the start of the arrangement applies to the whole project. Later changes are listed. Notes and clips stay in place; only the bar grid differs after a change.
  6. Send and mute automation. Send level automation and track on/off automation are not converted yet. Redraw them in FL Studio if you need them.
  7. Pitch bend. Per-note pitch bend becomes FL Studio slide notes on Sampler channels converted from Simpler, and on the channels built from a Drum Rack or Instrument Rack. Plug-in instruments may not follow FL Studio slides: on a plug-in in a rack chain the slide notes are still written, and on any other plug-in instrument the pitch bend is listed in the notes instead.
  8. Listen to approximated effects and adjust them by ear against your original.

Learning FL Studio with your own songs

Opening a song you already know is a gentle way to learn FL Studio. You can see how your tracks became channels and Mixer tracks, how clips became patterns, and how your envelopes became automation clips. Then you can start using FL Studio's own strengths, such as reusing patterns across the Playlist.

Ready? Convert your first Ableton Live Set to FL Studio. Prices and the 2 free conversions every month are on the pricing page. Going the other way? Read switching from FL Studio to Ableton.

Questions

Can I transfer my Ableton projects to FL Studio?

FL Studio cannot open Ableton .als files, but you can convert them. DAWPORT turns an Ableton Live Set into an FL Studio project with channels, patterns, Playlist clips, mixer routing, supported plug-ins and supported automation, and lists what changed.

What happens to my Ableton clips in FL Studio?

Each Arrangement MIDI clip becomes its own FL Studio pattern, named after the clip or track, and is placed in the Playlist. Audio clips become Playlist audio clips.

Does Session View convert to FL Studio?

No. DAWPORT converts the Arrangement. Session View clips are not converted, so record or copy the clips you need into the Arrangement before converting.

Which FL Studio version do I need?

Converted projects are made for FL Studio 26.

Do Ableton's own instruments convert?

Simpler becomes an FL Studio Sampler channel. Operator, Wavetable and other Live synths are not converted, and their notes do not appear in the FL Studio project. Render those parts to audio in Live before converting, or keep the original set to copy the notes from.

Convert now