Routing is where FL Studio and Ableton Live differ most under the hood. FL Studio has a separate Mixer that channels are routed into. In Live, every track carries its own mixer. When a project moves between them, the routing has to be rebuilt in the other DAW's shape. This guide shows how DAWPORT does that in each direction, and which routing you may need to reconnect yourself.
2 free conversions every month. No card required.
Two mixer models
FL Studio. Channels in the Channel Rack are routed to Mixer tracks (inserts); a channel with no routing goes to the Master. Mixer tracks can route to other Mixer tracks. A normal send is heard on the destination track and is taken after the fader by default, while a sidechain route sends audio that is not heard there. Each Mixer track has 10 effect slots (Image-Line manual).
Ableton Live. Each track has an input, an output and its own mixer. The Main track is the default destination of all other tracks. Group tracks sum other tracks, and Return tracks receive sends, each with a Pre/Post toggle (Ableton manual). Tracks can also take audio from another track at Pre FX, Post FX or Post Mixer (Ableton manual).
| FL Studio | Ableton Live |
|---|---|
| Mixer track (insert) | A track's mixer section |
| Several channels on one insert | Group track with one track per channel |
| Insert routed into another insert | Track inside a Group, or a send |
| Insert that others send to in parallel | Return track |
| Master | Main track |
| Effect slots | Device chain |
FL Studio to Ableton Live
Which Mixer tracks become Live tracks
DAWPORT builds Live tracks from the Mixer tracks your project actually uses: one with a channel routed to it, a name, effects, or a controller pointing at it, plus anything those route into. Empty, unnamed inserts are left out, so you don't get a hundred blank tracks.
- An insert fed by an audio clip channel becomes an Audio track. One fed by an instrument becomes a MIDI track.
- An insert fed by several channels becomes a Group track, with one track per channel inside it. The insert's effects sit on the Group, so the channels still share them as in FL.
- Channels routed straight to the Master get their own tracks, sent to Live's Main track.
- An insert that other inserts route into at full level becomes a Group track.
Sends and return tracks
An insert becomes a Return track when other inserts send to it below full level, when it is docked to the right of the FL Mixer, or when a track sends to it in parallel while also feeding the Master. The send level comes across as Live's send amount, post-fader, which matches FL Studio's default.
Send level automation is not converted. The send keeps its saved level; redraw the movement in Live if you need it.
Master and track settings
| FL Studio | In Ableton Live |
|---|---|
| Master volume, pan and effects | Main track, with its volume, pan and tempo automation |
| Mixer track volume and pan, and their automation | Track volume and pan, and their automation |
| Mixer track on/off (mute) | Track Activator |
| Effect order in the slots | Same order in the device chain |
| A route into a bus at less than full level | A Utility at the end of the chain, when the route is simple |
| Solo | Not carried |
| Stereo separation, phase invert, swap left/right, track delay | Not carried |
Routing Live cannot copy
A Live track has one main output. If an FL insert routes audibly to two or more buses that are not returns, or into a track that has its own instrument, DAWPORT cannot pick one output without changing the mix. It leaves that track's output unconnected and lists the route in the conversion notes. The track keeps its clips and effects. In Live, set its Audio To to the bus you want, or use sends.
Sidechain routes are covered separately in sidechain between FL Studio and Ableton.
Ableton Live to FL Studio
Tracks become Mixer tracks
Every Live track, including Group and Return tracks, gets its own FL Studio Mixer track. Live's Main track becomes FL's Master, with its volume and pan.
- Group tracks: the Group gets its own Mixer track, and its members are routed into it at full level.
- Return tracks: each becomes an ordinary Mixer track that the other tracks send to, with its mapped effects. FL Studio has no separate return type, and a conversion note says so.
- "Audio To" another track: becomes a route from one FL Mixer track to the other.
- No Main track in the Set: tracks are routed to FL's Master.
Sends
Post-fader sends become FL Mixer sends with their level carried over. FL Studio Mixer sends are post-fader, so pre-fader sends are not converted. Rebuild them in FL Studio if you need a separate monitor or parallel mix; the Image-Line manual suggests the Fruity Send plug-in for taps before the fader. Send level automation is not converted.
Outputs and inputs FL Studio cannot copy
- A track whose output goes to external hardware, or to a track that no longer exists, keeps its content and sends but has no direct output in FL Studio. The notes list it.
- Track input routing, such as a track that records or monitors another track, is not converted when DAWPORT cannot resolve it. The receiving track keeps its own clips, and the notes list the route. Since 1.0.66 this no longer stops the conversion.
Mixer track settings
| Ableton Live | In FL Studio |
|---|---|
| Track volume and pan, and their automation | Mixer track volume and pan, and automation clips |
| Track Activator (on/off) | Not converted; listed in the notes |
| Solo, track delay, crossfader | Not carried |
| Split Stereo Pan mode | Not carried; the Mixer track is centred |
Very large sets: the 125-insert limit
Converted FL Studio projects use up to 125 Mixer inserts. If a Set needs more, DAWPORT (since 1.0.68) lets tracks that are audibly neutral share the insert they already feed, their Group or the Master. Such a track is at unity volume, centred, has no sends, effects, delay or mixer automation, and nothing else depends on it. Each shared track keeps its clips and instrument, and is listed in the notes. If not enough tracks qualify, the Set cannot be converted. Bouncing or combining some tracks in Live first brings the count down.
After converting: a routing check
- Read the conversion notes for routing entries: unconnected outputs, inputs, pre-fader sends, shared inserts.
- Solo each Group or bus and check that the right tracks feed it.
- Check that send levels to reverbs and delays sound right against your original.
- Redraw any send automation.
- In FL Studio, consider docking converted return tracks to the right of the Mixer, so they read like Live returns.
New to the other DAW's mixer? FL Studio vs Ableton for switchers maps the rest of the concepts. Ready to convert? Go to FL Studio to Ableton Live or Ableton Live to FL Studio.

